Sandstrom S1IPBTB12E, Инструкция по эксплуатации

Страница: 15 / 124

15
GB
Removing the Plastic Strip from the Remote Control
Remove the protective plastic strip from the battery if the
battery is being used for the first time. It is located at the
bottom side of the remote control.
2. Pull out the battery holder and remove the old
battery.
Battery Replacement for the Remote Control
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in the direction
of the arrow. (If you are having difficulty with the tab,
use a paper clip to squeeze the tab.)
3. Replace with a new battery. (Ensure the + polarity
faces up.)
4. Insert the battery holder back into the remote control.
It will close with a click.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause fire, personal injury or damage property.
• Install the battery correctly in the battery compartment. Normally the battery’s positive
polarity (+) will face up.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with
local regulations.
• Small button cell batteries such as the one used in the remote control are easily
swallowed by young children and this is dangerous. Keep loose button cells away from
young children and make sure that the battery is secure in the remote control. Seek
medical advice if you believe a battery cell has been swallowed.
S1iPBTB12E_IB_RC_130516_Zell.indb 15 16/5/13 6:33 PM