Sandstrom S1HDVD10, Инструкция по эксплуатации

Страница: 14 / 32

GB-12
Saf
et
y
W
ar
nings
Produc
t O
ver
view
Connec
tions
Sy
st
em
Set
-up
Pla
yable
Disc
/ Suppor
tiv
e
For
ma
ts
/ P
la
yback
Func
tions
H
in
ts
and
Tips
and
Specifica
tion
Start Up
Press the STANDBY/ON button on the DVD player or remote control. Turn on the TV and
select the video input connected to the DVD player.
Basic Playback
1. Press the OPEN/CLOSE button to open the disc tray, place a disc into the disc tray
with the label facing up.
• For a double-sided disc, load the side which you want to play facing down.
• There are two different disc sizes. Place the disc in the correct guide on the disc tray.
If the disc is out of the guide, it may damage the disc and cause the DVD player to
malfunction.
• Do not place a disc which is unplayable in this DVD player.
2. Press the OPEN/CLOSE
button to close the disc tray, the playback will automatically
start.
• Some discs may not playback automatically, you can press the ENTER/PLAY
button to start playback.
3. Depending on the disc, a menu may appear on the TV screen by pressing the MENU
button. Press the
buttons on the remote control to select menu options
and press the ENTER/PLAY button to start, or press digits to select a menu options
directly.
Stop Playback
1. Press the STOP button to go to pre-stop mode, the TV screen will display “Press Play
Key to Continue”. With some discs, the DVD player can recall the stopped location, such
as on DVDs and on audio CDs.
2. Press the ENTER/PLAY button to resume playback from the location where playback
was stopped or from the beginning of the disc.
3. Press the STOP button twice to stop completely.
Previous and Next
1. During playing, press the PREV button to go back to the start of the previous
chapter. Each press of this button will skip a chapter until the start of the disc.
2. Each press of the NEXT button during playing will skip the current chapter and
play the next one.
Fast Forward and Fast Reverse
1. Press the F.FWD button to fast forward through the disc. Each time the F.FWD
button is pressed, the fast forward motion speed changes.
2. Press the ENTER/PLAY button to resume normal playback.
3. Press the F.REV button to fast reverse through the disc. Each time the F.REV
button is pressed, the fast reverse motion speed changes.
4. Press the ENTER/PLAY button to resume normal playback.
Sandstrom S1HDVD10_IB_100617_Zell.indd 12 17/06/2010 10:29 AM