43
Problem
Solution
The unit does not
respond when pressing
any button
• The unit may freeze up during use. Switch the unit off and then on
again at the mains socket to reset the unit.
Desired station not found
• Weak signal. Use the Manual Tune function.
No coverage in your area
or poor reception
• Adjust the position of the aerial.
The display is blank
• This may occur if the broadcaster changes the label of a service or
removes a label while tuned. The unit will try to re-tune or perform a
scan.
If any functional abnormality is encountered, unplug the unit from
the mains socket and reconnect it again.
SPLDAB17_IB_170509_will.indd 43
10/5/2017 9:17 AM