GB
16
1. To activate auto scan, first press the MENU button
to enter into the Tune Select Menu. Then turn
the SCROLL dial to select “Autoscan”, and then
press the OK dial to confirm. The display will show
“Scanning …” and a progressing slide bar. This may
take a few minutes, depending on the number of
stations found.
2. All the stations that have been found will be
stored automatically. To explore the found
stations, turn the SCROLL dial. Press the OK dial
to confirm.
DAB Auto Scan
The auto scan will search for the entire DAB Band III channels. After the scan has finished,
the first alphanumerically found station will be automatically selected.
DAB Operation
If the unit is connected to the mains power and then
switched on from standby for the first time, the unit will
automatically enter into the DAB mode and perform
auto scan function. During the scan the LCD display
will show “Scanning…” together with a slide bar that
indicates the progress of the scan and the amount of
stations that have been found so far.
Once the scan has finished, the unit will select the first
alphanumerically found station. Explore the found
stations by turning the SCROLL dial. When you find a
station that you would like to listen to, press the OK
dial.
Full auto scan will not replace the DAB stations in memory. If you want to
remove all the previously scanned stations, a system reset is required.
If there is no stations found after auto scan, the radio will then enter
into the Tune Select Menu, you can now turn the SCROLL dial then
press OK dial to select “Manual tune” or “Autoscan” for stations.
SVDRB_W_WN12E IB_RC_130605_Michelle.indb 16
5/6/13 11:42 AM
