INSTALLATION
12
24. Slot and click the control panel cover back
into place. Secure with 2 screws.
25. Slide and snap into place the small cover clip
(as shown).
26. On the opposite side to the newly-positioned
hinge, slot and click the large cover clip into
place (as shown).
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until six hours after moving the unit. The coolant fluid needs time to settle.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using
a ‘wrung-out’ sponge or cloth. Wipe completely dry before replacing the shelves, drawers and salad
bins. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.