Sandstorm SDW60B10, Инструкция по эксплуатации

Страница: 8 / 28

GB-8
Bef
or
e
U
se
Cleaning
and
M
ain
tenanc
e
Specifica
tion
Oper
ation
Saf
et
y
W
ar
nings
Adjusting Rinse Aid Reservoir
The rinse aid reservoir has six settings. Both the recommended setting and the factory setting is "4". If the
dishes are not drying properly or are spotted, adjust the dial to the next higher number until your dishes
are spot-free.
• If the water hardness in your area is soft, you may not need rinse aid as it may cause white
film to develop on your dishes.
• If there are some rinse aid residue left in the washing compartment or your dishes, please
turn the rinse aid dispenser dial to 1.
• If you select to use detergent tablet, you do not need to add rinse aid into the rinse aid
reservoir.
Adding of Rinse Aid
Rinse aid helps to ensure water does not cling and leave marks on crockery during the drying phase and
helps crockery dry faster after it has been washed. Only pour rinse aid that is for domestic dishwashers into
the reservoir. This model is designed to use liquid rinse aid only.
Please follow the steps below to pour the rinse aid into the storage reservoir, and the amount will dispense
automatically.
1. Turn the cap and open. When the cap open marking
is aligned, you may lift the cap up.
2. Pour the rinse aid until the rinse aid indicator turns
completely black in colour and close the cap.
3. Be careful not to overfill the reservoir. Wipe up any
spills.
• Rinse aid warning light will illuminate when the reservoir is running out of rinse aid and
requires refilling.
• Alternatively, you can judge the amount of rinse aid by checking the rinse aid indicator
light next to the reservoirs cap when the indicator is black, it means it is full. When it is
clear, it means it is almost empty.