4
WARRANTY
INSTALL GRILLE
SERVICE PARTS
A
Install ceiling material to complete the ceiling construction and cut around the fan housing.
To attach the grille assembly to the fan housing, pinch the grille springs on the sides of the grille
assembly and position the grille into the housing with the grille springs in the appropriate slots. Push
the grille assembly towards the ceiling to secure.
1
2
4
5
6
c
a
b
8
7
9
11
12
10
d
d
Grille Assembly (includes part 2)
* Blower Assembly includes part 3, 4, 5, 6, 7, a, b
Replacement installation: Remove the screw (part a), then take out the blower assembly
from the housing (part 8). Replace the broken parts.
* Replacement parts are shown for illustration purposes only and are not sold seperately
WARNING:
Ensure that the fan is switched off from the supply power before replacing.
PART
PART NAME
Qty.
1
2
3
4
5
6
7
8
9
10
Housing
Blower Wheel
Blower
Power box
Wire Panel / Harness Assembly
Motor
1
2
1
1
1
1
1
1
1
Wiring Plate
4
11
12
Damper/Duct Connector
1
1
Motor Plate
Grille Spring
Hanger Bars
a
3
Screw
b
3
Screw
c
5
Screw
d
2
Screw
S&P USA Ventilation Systems, LLC. & S&P Canada Ventilation Products, Inc. warrants to the original end user of its products that our
exhaust fans will be free from defects in materials and workmanship for a period of Five (5) years from the date of original purchase.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES
OF SUITABILITY FOR A PARTICULAR PURPOSE. During this five year period, S&P will, at its option, repair returned products or
parts, or provide replacement products or parts, without charge, for any product or part which is found to be defective under normal use.
This warranty does not cover normal maintenance and service or any parts that have been subject to misuse, negligence, accident,
improper maintenance or repair, faulty installation or installation contrary to recommended installation instructions. S&P’s obligation to
repair or replace, at S&P’s option, shall be the purchaser’s sole and exclusive remedy under this warranty. No labor or materials are
covered by this warranty. S&P shall not be liable for incidental damages arising out of or in connection with product use or performance.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
To qualify for warranty service, you must notify S&P at the address or telephone number stated below, provide the model number and
part identification, and describe the nature of any defect in product or part. You may be required to ship a defective part to S&P. There
will be no charge for shipping repaired or replacement parts from S&P to you if your address is in the United States or Canada. At the
time of requesting warranty service, you must present evidence of the original purchase date.
S&P USA Ventilation Systems,LLC.
6393 Powers Avenue Jacksonville, FL 32217
P. 904-731-4711
F. 800-961-7379
www.solerpalau-usa.com
S&P Canada Ventilation Products, Inc.
6710 Maritz Drive Unit #7 Mississauga, ON L5W 0A1 - Canada
T. 416-744-1217
F. 416-744-0887
www.solerpalaucanada.com
3
c
