S&P CB-2005N, Руководство пользователя

Страница: 18 / 52

18
ENGLISH
2. INSTALLATION
NB: Before installing the device, read all the Safety Warnings indicated in the correspon-
ding section.
2.1. Fix the metal frame onto the rear of the device with its corresponding bolt. See FIGURE
3-A. Note: Do not use an electric screwdriver.
2.2. If you have purchased the TOWEL RACK CB-2005N (sold separately), this must be fi xed
to the heater before the heater is fi xed to the wall , as follows:
• Put the device on a soft surface, with the rear part facing upwards.
• Put the
TOWEL RACK KIT in the position indicated in FIGURES 3-4 .
• Place the two plastic parts as indicated in FIGURE 5-B , and fi x them with their 6 bolts.
Note: Do not use an electric screwdriver.
• Make sure the TOWEL RACK KIT moves correctly (See FIGURE 6).
2.3. You can mark the correct position of the holes with the paper template provided. Mark
and make the 3 x Ø 6 mm holes on the wall (See FIGURE 7A) . If you have purchased the
TOWEL RACK CB-2005N (sold separately), you must make 5 x Ø 6 mm holes as indicated
on the same paper template (See FIGURE 7B) .
2.4. Once you have made the holes, insert all the wall plugs and screw in the two top screws,
making sure there is 3 mm of separation between the head of the screw and the wall. The
3 mm separation can be achieved with the plastic wedge provided
(See FIGURE 7 A-B) .
2.5. Hang the device on the two top screws (FIG 8.1 - 8.2) and secure it with the screw on the
bottom (FIG. 8.3) . If you purchased the TOWEL RACK CB-2005N (sold separately), you
must also secure it to the wall with the two lateral screws (FIG 8.4) .
NB: Don’t use an electric screwdriver to tighten the screws.
3. PLUGGING IN AND USING THE DEVICE
NB: Before plugging in the device, make sure the mains voltage matches that indicated on
the data plate.
NB: Before using the device, read carefully all the Safety Warnings indicated in the corres-
ponding section.
3.1. Connect the device’s power cord to the mains socket.
3.2. Actuate the master switch situated at the rear of the device (ON / OFF) .
NOTE: If the device is not going to be used for a long time (summer), we recommend turning
it off with this master switch.