S&P 5226833200, Руководство по установке и эксплуатации

Страница: 7 / 24

7
RADIANT FAN HEATER // HEC-3000
Please read these instructions carefully before using the product in order to avoid damage
or any dangerous situations arising. Any use of the product other than that indicated in this
manual may cause fire, electrical danger, or injury and will make the warranty null and void.
The warranty does not cover any defect, deterioration, loss, injury, or damage that is due to
incorrect use of the product. All legal rights in this regard are guaranteed. No warranty condition
can exclude or change the warranty conditions regulated by State laws that may not be excluded or
modified for any reason.
Before doing anything else, remove the packaging carefully and check the integrity of the product.
Should any defects or damage be found, do not install or attempt to repair the equipment, but
contact the dealer.
Do not leave the packaging within reach of children and dispose of the parts in compliance with
current provisions.
1.
The product
 Description of the product (Figure 1 ):
A Halogen fan heater HEC-3000 model
B 2 x halogen lamps
C Upper metal tube
D Middle metal tube
E Bottom metal tube
F Base
2.
Safety instructions
 Make sure the power supply corresponds to the details shown on the nameplate:
230 V
~
50Hz (Clase I)
 Make sure the electrical circuit has the capacity for an appliance rated at 3000W ( 13 A).
 This product has been designed as a mobile heater.
 Flammable objects (curtains, furniture, plants, etc. ) should not be placed at less than 3
metres from the appliance. The front of the appliance must not be obstructed.
 Do not place the device directly under an awning or flammable material.
 The unit can operate outside, if always under cover.
 Do not use this heater near a bath, shower or a swimming pool.
 The heater should be situated only in areas where the air can circulate .
 Do not use the product in rooms filled with explosive gases or vapours generated by
solvents and paints or that are inflammable.
 Make sure the surface is flat and firm to prevent movement or vibration that could
adversely affect the life of the lamps.
ENGLISH