PROGRAMMING YOUR SAFE
Batteries
1. Remove the emergency cover and insert the emergency key.
2. Turn emergency key clockwise and hold.
3. Turn door handle clockwise and pull the door open.
2. Insert 4 x AA batteries into the battery compartment.
When replacing batteries in the future, it is best to use heavy duty alkaline AA batteries.
(Note: When you replace the batteries, you will also need to re-program your user code.)
Program User Code
This safe comes programmed with a preset factory code - 1 5 9 . For security purposes you
will need to change this to your own personal code by following these steps:
1. Press the reset button.
A ‘beep’ will sound.
2. Input your new user code (3-8 digits) followed by the “#” key.
The Confirm Light will turn on, confirming that the user code has been changed.
If you wish to change your code again, refollow the steps above.
USING YOUR SAFE
You will now be able to unlock and open your safe using your own user code.
Open Safe with User Code
1. Enter your 3-8 digit user code.
2. Confirm code by pressing the “#” key
If the code is entered correctly, the Confirm Light will turn on.
3. Turn the Door Handle and open the safe.
(If the code is entered incorrectly, the Warning Light will turn on and you wil not be able to
open the safe. If the code is entered incorrectly 3 times consecutively, the safe will
automatically lock for 30 seconds. Another 3 incorrect entries consecutively, the safe will lock
for 5 minutes.)
Emergency Key
The emergency keys are provided for:
- initial entry to the safe.
- a means of access if the batteries go flat.
- a means of access if you forget your user code.
They should not be used for everyday access.
Responsibility will not be taken if the user misplaces the emergency keys.
Store these keys in a safe place but NOT inside the safe!
