USA
Tel: +1-408-470-4440
Fax: +1-408-470-4470
Japan
Tel: +81-3-5423-8101
Fax: +81-3-5423-8102
Taiwan
Tel: +886-2-2515-2522
Fax: +886-2-2515-2295
China
Tel: :+86-755-8348-5218
Fax: +86-755-8348-5418
Korea
Tel: :+82-2-3452-9079
Fax: +82-2-3452-9145
Europe
Tel: +33-(1)-43-37-2131
Fax: +33-(1)-43-37-2111
Rest of the World & Israel
Tel: +972-9-764-5000
Fax: +972-3-548-8666
For more information, please
visit www.sandisk.com/uSSD
Specifi cations
High Performance*
SLC fl ash
• Sustained Read 31.6 MB/sec
• Sustained Write 24.8 MB/sec
MLC fl ash
• Sustained Read 29.9 MB/sec
• Sustained Write 12.8 MB/sec
Form Factors
• 2x5 header, x86 internal USB standard
• Confi gurations: Standard, low profi le
Electrical Specifi cations
• DC supply voltage: 5V (±10%)
• Active mode: 150 mA (typ)
Compatibility and Certifi cations
• USB 2.0 interface, certifi ed by the USB organization
• Complies with Microsoft Vista ReadyBoost requirements
• RoHS & Chinese RoHS Compliance
Wide OS Support
• Microsoft XP Embedded, Microsoft Windows for Point of Service,
Microsoft Win.CE, Microsoft XP Pro, Microsoft Windows Server 2003,
Microsoft Windows Vista (ReadyBoost & Storage), and Linux
Environmental Specifi cations
• Operating temperature: 0°C to +70°C
• Storage temperature: -55°C to +95°C
• Operating altitude: up to 80,000 feet
• Operating shock: 50g, 11msec, half sine
• Non-operating shock: 1,500G, 0.5msec, half sine
• Operating vibration: 2.17gRMS (20Hz to 2000Hz)
• Non-operating vibration: 3.08gRMS (20Hz to 2000Hz)
Mechanical Specifi cations
• Standard: 26.65mm X 37.80mm X 10.60mm
• Low profi le: 26.65mm X 37.80mm X 6.88mm
* 1 gigabyte (GB) = 1 billion bytes; 1 megabyte (MB) = 1 million bytes; speeds based on internal testing; performance may be lower
depending on host device. Some of the listed capacity is used for formatting and other functions, and thus is not available for data
storage.
** Based on internal testing. The MTTF calculation does not take into account the disk endurance limitation. For the disk endurance,
please refer to the endurance section in the product specifi cation.
SanDisk and the SanDisk logo are trademarks of SanDisk Corporation, registered in the United States and other countries. uSSD
is a trademark of SanDisk Corporation. Other brand names mentioned herein are for identifi cation purposes only and may be
trademarks of their respective holder(s).
©2007 SanDisk Corporation. All rights reserved. 8/07 80-11-01469
High Reliability
• Unlimited Read cycles
• Dynamic and static wear-leveling
• Dynamic bad block management
• Advanced EDC/ECC
• Up to 4M mean time to failure
(MTTF)** hours
Wide Capacity Range
• SLC fl ash: 1GB to 8GB
• MLC fl ash: 2GB to 8GB
Limited Warranty
• 3 years
