Fusion ioMemory Hardware Installation Guide | Rev 80-11-71092
Plug the product end of the cable (shown above) into the device. Plug the other end of the cable (shown below) into an
available power source cable. Consult your server documentation for available power options. Some servers may require
alternative power sources and adapters to connect with the cable.
Return to the installation instructions
on page 12
.
Previous ioDrive Devices
The external power cable is
optional
on the following devices (as is additional power through the PCIe slot). If the external
power cable is used, the device can pull up to 36 watts from the 12V rail over the external cable. Make sure your system
has sufficient power for the installed devices.
18
