Fusion ioMemory Hardware Installation Guide | Rev 80-11-71092
7. Secure the ioDrive Octal device's retaining bracket using screws or levers (depending on how your hardware is
configured).
8. Connect the ioDrive Octal device's power connectors to the computer's internal power cables.
9. Replace the computer's access panel.
10. Plug in the power cable and turn on the computer.
11. Your operating system may detect the ioDrive Octal device and ask if you want it to install a hardware driver for the
device. In that case, click
Cancel
.
ATTENTION!
Important - Removing the ioDrive Octal device
Many x16 PCIe slots include latches that hold the card steady. Before you remove the ioDrive Octal, be sure to
reach under the device and release these latches. Failure to do so could cause damage to the latch or the
motherboard.
You are now ready to install the driver and utilities software. See the
Fusion ioMemory VSL User Guide
based on your
operating system.
22
