USERSMANUALSOFSSG-0007CSSYSTEM
TEMPSkeyS(needStoSbeSusedStogetherSwithS
Skey):S
Press
key, the panel will display
the water temperature set last time and keep flashing: Press
key to adjust temperature to highest
at 42
℃
; press
key to adjust temperature to lowest at 10
℃
. It will automatically store and return
to show the current water temperature after flashing 3 seconds.
RADIO/AVSkeyS(Radio/DVD/ControlSandSdisplaySofStemperature):
When the control systems are
ready to work, first press
key, it will go into Radio function, and the panel shows radio channel
set last time (under Radio status, press
key to select pre-stored radio station); second press,
it will go into TV function (this function is optional), the panel shows TV symbol; third press, it will
go into DVD function (this function is optional), the panel shows symbols of DVD at the same time
(Under DVD status, press
key to adjust the volume of DVD); press for the fourth time, the
panel will show the detected water temperature.
TUN/VOLSkeyS (need StoS be Sused S togetherSwith S
S key): S
Under Radio status, first press
key, the panel will show 2-digit volume, press
can adjust volume upwards or
downwards (the panel will automatically show radio frequency when stop adjusting for 3 seconds).
Second press
，
the current frequency will flash, press
S
key to adjust the current frequency ,
it will store automatically after flashing 3 seconds. Third press, the panel will show radio channel,
press
key to select pre-stored radio station ( the panel will automatically show previous
radio frequency when stop adjusting for 3 seconds). Long press for 5 seconds, the system will
automatically search radio frequency again and store the searched frequency at different channel
sequentially.
HeatingSsystem:S
After the control systems are ready to work, the heater will start working 10 seconds
after the circulation pump is activated unless the temperature sensor detect that the set temperature is
lower than the detected one. When the water temperature reach set temperature, the heater will stop
working automatically. When the water temperature is under 2
of the preset one, the heater will be
℃
activated to work again.
REMARK:S
The heater will not be activated to work if there is not enough water flow trans-fluxing it.
InterlockedSsystemSbetweenSheaterSandSpumps:
S
Long press key again for 20 seconds, the
system can be converted between interlock mode or non-interlock mode (the indicator light on
key shows
REDS
under interlock mode; while it shows
SGREENS
under non-interlock mode). When it
is in interlock mode, the heater will stop when you press any key of pumps and bubble. This feature is
to reduce the power needed for the spa so that it can match the power limit of some countries. In non-
interlocked mode, the heater will keep running when the other pumps are activated unless the water
temperature reaches the set temperature.
Temperature S sensor’s S self-checking S system:
When the panel shows EO which means the
3