S&C Instruction Sheet 681-525
9
Installation
NOTICE
The position lever of the portable motor operator may
need to be manually rotated slightly from side to side
to allow the output shaft to line up with the operating
shaft on the gear .
STEP 4.
When the portable motor operator is seated on
the operating shaft of the gear, release the
latching lever. Make sure the portable motor
operator is fully seated and both latches have
latched onto the stop ring on the tank.
See Figure 5.
STEP 5.
Connect the cable with remote controls to the
portable motor operator. See Figure 6.
Figure 6. The connecting cable with remote controls.
Latching lever
Stop ring
Latch
Figure 5. Checking to make sure the portable motor operator is
fully seated and latched.
Cable with remote controls
