Safety Precautions
DANGER
The S&C GridMaster Microgrid Control System may be installed in equipment
that operates at high voltage. Failure to observe the precautions below will
result in serious personal injury or death.
Some of these precautions may differ from your company’s operating procedures
and rules . Where a discrepancy exists, follow your company’s operating procedures
and rules .
1 .
QUALIFIED PERSONS. Access to the GridMaster
Microgrid Control System must be restricted only to
qualified persons . See the “Qualified Persons”
section on page 2 .
2 .
SAFETY PROCEDURES. Always follow safe
operating procedures and rules .
3 .
PERSONAL PROTECTIVE EQUIPMENT. Always
use suitable protective equipment, such as rubber
gloves, rubber mats, hard hats, safety glasses, and
flash clothing, in accordance with safe operating
procedures and rules .
4 .
SAFETY LABELS. Do not remove or obscure any
of the “DANGER,” “WARNING,” “CAUTION,” or
“NOTICE” labels and tags . Remove tags ONLY if
instructed to do so .
5 .
ENERGIZED COMPONENTS. Always consider all
parts live until de-energized, tested, and grounded .
6 .
MAINTAINING PROPER CLEARANCE. Always
maintain proper clearance from energized
components .
S&C Instruction Sheet 1025-511
5
