background image

S&C Type CS-1A Switch Operator

Outdoor Transmission

November 13, 2023
©  S&C Electric Company 1975-2023, all rights reserved

Instruction Sheet 719-500

Installation

Table of Contents

Introduction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2

Qualified Persons � � � � � � � � � � � � � � � � � � � � � � � � � � �  2
Read this Instruction Sheet  � � � � � � � � � � � � � � � � � � �  2
Retain this Instruction Sheet� � � � � � � � � � � � � � � � � � �  2
Proper Application  � � � � � � � � � � � � � � � � � � � � � � � � � �  2
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  2

Safety Information � � � � � � � � � � � � � � � � � � � � � � � � 3

Understanding Safety-Alert Messages � � � � � � � � � � �  3
Following Safety Instructions � � � � � � � � � � � � � � � � � �  3
Replacement Instructions and Labels  � � � � � � � � � � �  3
Location of Safety Labels � � � � � � � � � � � � � � � � � � � � �  4

Safety Precautions � � � � � � � � � � � � � � � � � � � � � � � 5
Shipping and Handling � � � � � � � � � � � � � � � � � � � � 6

Inspection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  6
Packing � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  6
Storage � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  6
Handling � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  6

Installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7

Before Starting � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  7
Connecting the Switch Operator to the Circuit-

Switcher Vertical Operating Shaft � � � � � � � � � � � �10

Making Conduit Connections and Connecting 

External Control-Circuit Wiring  � � � � � � � � � � � � � �11

Using the Manual Operating Handle  � � � � � � � � � � � �12
Using the Selector Handle (Coupling and 

Decoupling)  � � � � � � � � � � � � � � � � � � � � � � � � � � � � �14

Adjusting the Switch Operator � � � � � � � � � � � � � 16

Adjusting Position Indicator and Cranking Direction 16
Adjusting the Travel-Limit Discs � � � � � � � � � � � � � � � �19
Adjusting the Auxiliary Switches � � � � � � � � � � � � � � �  22
About the Extra Auxiliary Switches  � � � � � � � � � � � �  23

For use with the Mark V Circuit-Switcher

Содержание CS-1A


























Отзывы: