1011-540 5-17-04
Operation
27
S&C Electric Company
BankGuard PLUS
Proprietary Information
Control
NOTE: If your control device is not connected to COM1 on your computer,
click on the Communication Setup tab, select the correct comm port, click
Connect, and then return to the Update Control Device Software tab and click Start
Update.
The update process takes 5 to 10 minutes. You can follow the progress in the lower
right corner of the window. Once the update is complete, the window
automatically closes.
CAUTION
NOTE: If the software on the disk is not the same type as the software in the control
device, an error message appears. Note which software version is in the control device,
then press <Enter> to abort the update process. When you have the correct new
software version, repeat the steps above.
If you cancel the update process once it has started, you deactivate the software
in the control device. If you
must
cancel the process, start the update process
again.
