Sandberg Wireless Laser Mouse Pro, Руководство пользователя

Страница: 3 / 17

ENGLISH
2
1 Introduction
The Sandberg Bluetooth Stereo Headset Pro
connects wirelessly to a Bluetooth device such
as a mobile phone or tablet computer. Remote
control your Bluetooth device with the track and
volume controls on the headset. The built-in
battery gives 8 hours of playback. Allows you
to make hands-free and wireless calls.
2 First use and charging
Before you use the headset for the first time,
the internal battery must be charged. Connect
the enclosed USB cable between the headset’s
Micro USB connector and a USB port, either on
a computer or on a USB AC mains adapter.
While the battery is charging, the LED displays
a red light. When charging is complete the LED
displays a blue light.
NB: The LED flashes when the battery is running
out of power.
3 Pairing
The first time you want to connect the headset
to a Bluetooth device you will need to pair the
two devices. Once you have done this the devices
will remain paired. Do as follows:
1. Place the headset and Bluetooth device within
a secure range of 2-3 metres.
2. Set the headset to “pairing mode”: Hold the
button down for 6 seconds until red
and blue lights flash alternately (when you
hear a voice after the button has been held
down for 3 seconds you must keep the button
depressed).
3. Search for Bluetooth devices on the Bluetooth
device to which the headset is to be connected.
See the documentation for this device to find
out how this is done.
4. The speaker is found under the name
“Sandberg Pro”. Connect to Sandberg when
this is found. If you are asked for a password
or PIN code, use “0000” (four zeros).