ENGLISH
7
5 Using the tuner
The tuner is switched on using the remote control and will automatically start TV display. You can
then switch between computer, AV device and TV signal using the AV/TV button on the remote
control.
6 Troubleshooting
• There is no picture and no sound
• If the red LED is off: Check that the power adapter is correctly connected.
• If the red LED is on: Check that the tuner is correctly connected to the monitor
and/or computer.
• There is a picture but no sound
• Check that the MiniJack cable is correctly connected to the computer’s Line In connector;
see section 1.1.
• Check that the volume is not on
Mute
. (
on the remote control)
• Check that the sound is not turned right down on the computer or speaker set.
• There is sound but no picture
• Check that the tuner is correctly connected to the monitor. If the Y cable is the wrong way
round, there will be no picture on the screen. See section 1.1.
• Check that the monitor supports the resolution the tuner is set to. Press
RES
on the remote
control to switch between the different resolutions.
If you need further help or assistance in connection with your Sandberg product, you can see
details about this on the penultimate page of these instructions.
Enjoy your Sandberg TV Tuner for Monitor.
4183_SandManual_134-01 7
4183_SandManual_134-01 7
21/02/06 8:47:28
21/02/06 8:47:28
