
8
USB connection
The box can also be connected to your computer using the USB cable provided. If you
connect it in this way, the box will appear as an extra hard disk on the connected com-
puter.
NB: To benefit from the higher speed of USB 2.0, you need to connect the box to a USB
2.0 port.
Installation in Windows
®
98 (for USB connection only)
1. Start Windows.
2. Insert the CD provided.
3. Connect the square plug on the USB cable provided to the box.
4. Connect the other end of the USB cable to your computer’s USB port.
5. Connect the power adapter cable provided to the box and the other end to the mains.
Turn on the switch at the back of the box.
6. The “Add New Hardware” wizard will appear. Click “Next” twice.
7. Enter the path “D:\” and click “Next” (where “D” is your CD-ROM drive).
8. Click “Next”, then “Finish”.
The box is now installed and ready for use.
Installation in Windows
®
Me/2000/XP (for USB connection only)
1. Start Windows.
2. Connect the square plug on the USB cable provided to the box.
3. Connect the other end of the USB cable to your computer’s USB port.
4. Connect the power adapter cable provided to the box and the other end to the mains.
Turn on the switch at the back of the box.
5. Windows will install the drivers for the box automatically.
The box is now installed and ready for use.
Using the box as an external USB hard disk
When you connect the box, a new drive is created on your computer. You can use this
drive in the same way as any other drive on your computer.
If you need to see all the drives on your computer you can find them under
“My Computer”.
ENGLIS
H