Customer Service - (888) 792-4264
11. LOCKED OUT OF YOUR SAFE
In the event you have forgotten the security code your primary action will be to use
your backup keys in order to gain access to your safe and follow the E-Lock Security
Setup Code instructions, starting at step 2 of activating the reset button.
Note: Factory pass code is “1-5-9-LOCK”
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to replacement keys.
8. UNLOCKING YOUR SAFE (Continued)
9. LOW BATTERY WARNING
10. E-LOCK QUIET MODE
8
Note: If 3 invalid code attempts are made in succession, this will cause 5 beeps while
the red light flashes 5 times. The user will be locked out for 60 seconds. You can still
use your backup key at anytime to open the safe.
If invalid code is entered again, you will hear 5 beeps while the red light flashes 5
times and the user will be locked out for 5 minutes.
Note: 1. In the factory settings, the sound has been turned on.
2. During the self-locking, no operation is available.
By activating the E-lock quiet mode, the safe will
no longer make audible sounds when interacting
with safe, allowing for silent access.
You can mute/unmute the keypad by entering
the “CLEAR” button with 1 green light flash.
This E-Lock is equipped to alert you when the batteries are
low by illuminating the yellow light (center) on the keypad
Always test the batteries when installing or replacing. If the
yellow light comes on when a button is pressed you know
the batteries are not fully charged.
LOW BATTERY
WARNING
