6
6.
3. INITIAL ENTRY (Continued)
Plug the electronic lock cable
into the back of the lock face.
The connector on the cable
will only fit into the
connector in the lock face in
one way.
Finally, we will install the
keypad onto the safe. First,
align the lock face to the
backer plate and slide the top
of the lock face up into the
two locking pins. Next, lightly
push up on the release tab
located on the bottom of the
backer plate, allowing you to
push the lock face and secure
to the backer plate.
7.
St
ep 7
St
ep 6
4. ELECTRONIC LOCK SECURITY CODE SETUP
1.
Important: Your safe comes programmed with a factory code of [ 1 5 9 # ].
It is necessary to re-program your safe with a new security code you have personally
selected to provide maximum household security. Be careful, in choosing your new
security code, you’ll want to be sure that you can operate the unit quickly without
making an error.
To begin programming, open
door and extend locking plates
to ensure access to the safe.
On the inside of the safe door,
locate the red plastic cap.
Unscrew and remove the cap,
giving you access to the reset
button. Press the reset button.
You will hear 2 beeps and the
keypad will illuminate indicating
that you are now in
programming mode.
Reset button
located
under plastic
cap
