7
4. ELECTRONIC LOCK SECURITY CODE SETUP (Continued)
5. OPENING SAFE WITH PROGRAMMED SECURITY CODE
Enter your new 3 to 8 digit
security code followed by the
[ * ] symbol.
2.
With keys in hand, close and lock the door.
Swipe the keypad to active, then enter your
security code followed by the (#) button.
If the security code is accepted,
the yellow LED will flash 2 times
followed by the green LED illuminating.
You now have access to your safe.
If the security code is rejected,
the yellow LED will flash 3 times
and beep 3 times.
*Now that your security code is successfully programmed, store your backup
keys in a secure secondary location. If you are not able to open your safe with your new
programmed code, repeat section 4 to program a new security code.
x2
x2
SUCCESS!
GREEN
If programming is is successful: Keypad
will beep 2 times and green LED will flash
2 times.
If your code was not accepted: the
keypad will beep three times and
the yellow LED will flash 3 times.
Press the
reset button and start again.
Inactivity Timeout: If this programming sequence is not completed within 10
seconds the red LED will flash 3 times and the keypad will shut down.
Return to step 1 to restart this process.
NEW 3-8 DIGIT SECURITY CODE
