8
ASSEMBLY
ATTACH THE PIANO TO THE STAND
1.
Place the piano on the stand. Align the circular holes on
the side board brackets with the holes on the body. Insert
the M6X30 knob screws into the holes and fasten by
hand. Note: Do not tighten the screws until all screws
have been inserted.
.
PLACE THE
PIANO ON THE
STAND AND
PLUG IN
TURN THE
POWER ON, AD-
JUST THE VOL-
UME AND BEGIN
TO PLAY
1.
CONNECT THE POWER ADAPTOR
- Plug the power cord of the
adaptor into the
“
DC 12V
”
jack, located on the left side of the
keyboard.
2. TURN THE POWER SWITCH ON
- Turn on the power switch
located on the left side of the keyboard ( is off, and is on).
The display will welcome you and set the voice to Grand Piano
automatically. The display will show
“
001: Grand Piano
”
.
Please note
, when your turn the power off, do not turn the power
back on immediately. Wait at least five seconds to turn the
power back on so that the circuit can properly reset.
3.
SET THE VOLUME TO THE DESIRED SETTING -
Adjust the
volume control to a comfortable level by sliding the Master
Volume control left, for softer sound or right, for louder sound.
POWER
MASTER VOLUME
MIN MAX
3
5
MUSIC RACK
INSTALLATION
4
Insert legs of the music rack into holes
on the top.
Содержание SS-100
Страница 1: ...1 SS 100 DIGITAL PIANO OWNER S MANUAL ...
Страница 2: ...2 IMPORTANT SAFETY INSTRUCTION ...
Страница 53: ...Rev 1 0 SS 100 DIGITAL PIANO OWNER S MANUAL ...