5
Menu Right
Left
Up
Down
Rear Cover Fixing Screws
Elevation Locking Screws
(Allen Screws)
Horizontal Locking Screws
(Allen Screws)
6
Camera Installation
1.Open the distribution box lid, take off the bracket installing subpanel from the
camera, select a position to install the camera and then fix the bracket installing
subpanel to the wall with screws.
2.Fix the camera to the bracket subpanel
Camera Connection
1. Open the distribution box lid, connect the video output plug to monitor or other
settings using coax or other cables.
2.Please select the appropriate power supply and connect it to the power input terminal.
3.Connect video cable and power cable, and then select the bracket's bottom or top
outgoing line way and put back the distribution box lid and fix it.
Lens Adjustment
1.Twist off camera's front cover, adjust zooming adjustment lever to the focal length
you need.
2.Then adjust focusing adjustment lever to get a clear picture.
1.Hold the camera, unscrew the horizontally locking screws, move the camera
horizontally, and then adjust camera s horizontal angle.
2. Hold the camera, unscrew the elevation locking screws, and move the camera
vertically, and then adjust camera s elevation angle.
3. Fasten the elevation and horizontal Locking Screws.
1.Camera Main Body
2.Sun Shade Cover
3.Lens
4.Front Cover
5.IR LED
6.Distribution Box Lid
7.Power Input
8.Video Output
9.Bracket
10.Bracket Installing Subpanel
11.Bottom Outgoing Line Hole
12.Top Outgoing Line Hole
13.Rear Cover
2
2
4
4
3
3
5
5
6
6
7
7
8
8
9
9
10
10
1
1
11
11
12
12
13
13
A
B
4.Parts
5. Dimension(Unit: mm)
OSD Menu Adjustment
1.Unscrew the rear cover fixing screw and take off the rear cover.
2.Set menu with five menu buttons.
3.Take back the rear cover and fasten it after setting.
