san ignacio 50297, Инструкция по эксплуатации

Страница: 8 / 24

4. Placing the pan
Place the pan inside the cooker and move it around to make it touch
the heating plate (Fig. 4).
5. Cooking rice
First insert the wire plug into the input socket of the cooker, then
plug into the wall outlet and switch on. At this time the pilot lamp will light up showing
that the heat preservation unit is working (but the cooking process has not begun yet).
Press down the white switch button to set the cooker in operation.
When the rice is finished cooking, the switch button will automatically be released and
the pilot lamp will go off. This indicates that the rice has finished cooking. Keep the lid on
the cooker for 10 minutes before serving.
6. Function of the heating preservation unit
The temperature of the rice in the cooker will automatically be kept within the range of
60ºC - 80ºC. Below this point the pilot lamp will begin to flicker, indicating that the auto-
matic heat preservation unit has been set to work. If heat preservation is not necessary,
pull the plug out of the power socket.
When your rice is done, the cooker will automatically switch to the warm function. Al-
ways unplug after use. Your cooker’s power will remain on unless you press the on/off
switch to “0”position and unplug the power cord.
3. MAINTENANCE & CLEANING
1. Prevent the bottom and the inside of the pan, as well as the heat-
ing plate, from being bumped. Keep them clean.
2. No water drops, dust, rice grains or any other foreign matter
should be allowed to remain between the bottom of the pan and
the surface of the heating plate; otherwise the cooker’s perfor-
mance will be affected, and in serious case, its parts or elements
can be burnt out (Fig.5).
3. Do not incline or slant the pan (Fig.6), otherwise its bottom will
not be in full contact with the heating plate and some parts or ele-