san ignacio 43820, Инструкция по эксплуатации

Страница: 6 / 20

2. HOW TO USE
PARTS
1. Food pusher
2. Feeding tube
3. Filter
4. Juice collector
5. Safety clamp
6. Pulp container
7. Motor unit
8. Juice jug
USING THE EXTRACTOR
Before using the juice extractor, make
sure that the motor unit switch is off. In
this way, if the assembly has not been
completed, the motor unit will not be
switched on and unnecessary damage
and personal injury will be avoided.
BEFORE STARTING
Before preparing juices for the first
time , wash all the pieces.
Before starting, make sure that the filter and the drive shaft are properly in place and that
there is no rigid contact between the filter blade and the transparent cover. Place the
transparent cover, hook the safety lock in the cover slot and turn on the appliance. Place
the juice jug under the pouring hole (insert the lid to avoid splashing).
To use the extractor, place the parts according to the parts diagram. Plug in the appli
-
ance, press the switch and let it run with nothing inside it for 5 seconds.
Place the vegetables or fruits in the feeding hole of the lid and use the pusher to press
them hard and correctly. Slowly, fill the jug with the extracted juice.
Note: While pressing food with the pusher, the force must not be sudden or high (greater
than 1 kg). Otherwise, less juice will be extracted from the food and the filter may stop.
TIPS
The extractor is not suitable for processing very hard, fibrous fruits or vegetables with a