Using your Toaster
1.
Most types of the breads can be toasted. However, the slice should not be so small as to drop into the
bread slot.
2.
The slice should be placed in the centre of the slot.
3.
After inserting the bread into the slots, select the designed darkness setting (toasting time) by the
bread browning lever and press the push knob down until it locks. The auto-‐adjusting bread guides
(located inside the toasting slots) will automatically centre the bread for even browning. After the
designed darkness setting is over, the bread will pop up automatically and the push knob and the
auto-‐adjusting bread guides will return to their original position.
4.
The surface of the net, the heating element, the toasting slots or the side cover becomes hot, so,
removing the toasted bread must be done carefully.
Warning
:
1.
Toasted bread can be very hot. Handle with care.
2.
Unplug the cord and move the Push knob up and down a few times to rise “jammed” bread.
3.
Never use metal utensils to free bread.
4.
Never insert your finger or metallic utensils into the bread slots or net.
3. MAINTENANCE & CLEANING
•
Before cleaning the appliance, remove the plug from the outlet.
•
To avoid the risk of electric shock, do not clean the base unit or the power cord with water, and do
not immerse them in water.
•
Clean the toaster regularly. This appliance contains no user serviceable parts and requires little
maintenance. Leave any servicing or repair to qualified personnel.
•
DO NOT IMMERSE THE TOASTER IN WATER.
•
After use and before cleaning, unplug the toaster power cord from the power outlet and wait for
the toaster to cool.
Cleaning the outside surfaces:
•
Unplug the toaster and allow it to cool completely before cleaning. To clean, wipe the exterior with
a slightly dampened soft cloth or sponge and dry with a cloth or paper towel. Do not use strong
cleaners or abrasives that may scratch surface, and never spray cleaners directly onto the toaster.
Cleaning top surface:
•
Unplug from outlet and allow cooling before cleaning. Wipe the surface on the top of the bread
slots with a damp cloth and dry it with another cloth or paper towel.
Cleaning crumb tray:
•
The removable crumb tray is located at the bottom. Grasp the handle of the crumb tray and pull
out completely. Dispose of crumbs and wash the tray in hot, sudsy water. Stubborn spots can be
removed with a nylon mesh pad. The tray is not safe for dishwasher. Dry the tray thoroughly and
naturally before re-‐inserting into its slot in the toaster.
•
DO NOT use metal scouring pads for cleaning. Pieces can get broken, and there is a risk of electric
shock if the pad comes in contact with electrical parts.