Samyung SPR-1400, Руководство пользователя

Страница: 19 / 47

- - - - - M A I N M E N U - - - - -
N A V I G A T E M E S S A G E S
P L O T T E R S A T E L L I T E
A L A R M S U S E R D I S P
E R A S E G P S S E T U P
D G P S S Y S S E T U P
C A L C U L A T E I / O S E T U P
C U R S O R : O f f
C E N T E R : S H I P
Q u i t
P R E S S [ M E N U ] T O
M A I N M E N U
SAMYUNG ENC
2. Setting-up the function
1) When menu switch is pressed on the plotter screen, menu screen for setting up the function comes up
and being displayed as follows.
2) Press the direction switch on plotter menu screen for selected position with changing to letter mode and
press for selection.
3) After changing to "Quit" letter on the indicator, press then it returns to plotter screen.
4) Press "MENU" on the plotter screen, it changs to MAIN MENU.
<PLOTTER MENU> <MAIN MENU>
5) Select CURSOR(ON/OFF)
It is function of setting-up whether it displays course on the plotter screen or not. When cursor is
displayed, it also displays the value of course position like the distance from the vessel position to course.
When the cursor is not displayed on the screen, it displays the value of the existing ship's position and the
distance from the ship to waypoint, and when press the "
◀
" switch, screen magnification ratio becomes
reduced and when press the "
▶
" switch, screen magnification ratio becomes increased.
When the cursor is on, if you move it : Central point of display will be changed as the spot of cursor.
6) Select CENTER(SHIP/CURSOR/OFF)
Select the center of plotter screen as the ship's existing position or cursor position. Once selected, it
automatically goes off.
* On plotter screen not selected center line with its cursor on.
Cursor position is on the center of screen(going out of the screen) when cursor is off, ship's position would
be automatically the center of screen(time about going out of the screen).