Samyung SNX-300, Инструкция по эксплуатации

Страница: 45 / 71

41
SNX-300
Chapter 6. INSTALLATION & TROUBLSHOOTING
6.1. HOW TO INSTALL RECEIVER
You may install Navtex Receiver by using a mounting bracket, which is provided with Navtex Receiver
on the desk, shelf and ceiling and so on.
6.1.1. Installation Place
①
Place where it is over 1 meter distance from Gyro Compass.
②
Place where is enabling ground at a short distance.
③
Place where there is not allowed to expose directly by sunray and avoid from heating element
ad the place where there is of little vibration.
④
Place where main unit, antenna, PSU, earth cables etc. are as far as possible from transmitter,
radar’s cable.
⑤
Place where there is as far as possible from a fan and exhaust pipe and well-ventilated place.
6.1.2. Installation Sequence and Method
①
Dissemble the screws with the knob at both sides to install NAVTEX Receiver.
②
Fix firmly a mounting bracket supplied with a Receiver on the desk or wall to be installed. (Use
screw.)
③
After NAVTEX Receiver is inserted into the mounting bracket, adjust the angles and spin the
screws with the knob of right and left for better adjustment.
342
단위
: mm
< Picture 6-1 Device Installations >