Samyung ENC N500, Руководство пользователя, Страница: 32 / 34

Installation and Operation Manual
63
5-6 NMEA 0183
The GPS chart plotter can be connected to
external devices with NMEA0183 and display
information such as followings.
• DSC VHF Radio
• GPS antenna(NMEA 0183)
• Navtex
• AIS receiver
DSC VHF radio
Fit and set up the optional DSC VHF radio as
above Pictures: NMEA 0183(1) IN and NMEA
0183(2) IN.
Other NMEA instruments
NMEA is an industry standard for
interconnecting instruments. The chart plotter
can be connected to other NMEA instruments.
Set up the optional NMEA instruments as
above pictures.
• The chart plotter can receive and display
depth, paddlewheel boat speed and water
temperature from an optional compatible
instrument.
• The chart plotter can receive data from an
optional compatible GPS or GPS/DGPS
source.
• The chart plotter can send GPS position and
other navigation data to an autopilot or
other instrument. An autopilot requires
APB, APA and VTG sentences
For information on sending NMEA data to the
instrument, contact Samyung ENC.
During setup to send NMEA data to other
instruments, set NMEA out and specify the
NMEA data to send.
Installation and Operation Manual
64
5-7 NMEA 2000
NMEA 2000 interface standard was
introduced for communications network to
interconnect marine electronic equipments
such as navigation chart plotter, engine, tank
level sensor and others on vessels. The
standard is regulated by The National Marine
Electronics Association in USA.
The chart plotter can be connected to
external devices with NMEA2000 and display
information such as followings.
• Engines have fuel flow sensors, therefore
fuel sensors are not required.
• The chart plotter can receive and display
wind speed and direction from an optional
compatible wind instrument.
• The chart plotter can receive and display
depth from an optional depth instruments.
• The chart plotter can receive and display
boat speed and water temperature from a
paddlewheel sensor on a optional speed
instrument.
If connected display unit, use the cable
compatible with NMEA 2000 standard.