13
SAMWAY
HANDLING/TRANSPORT
TECHNICAL/DIMENSIONAL DATA
C400 220/380 V
THREE PHASES
C400 220 V SINGLE
PHASE
Make sure that the lifting cables are not attached to fragile parts.
Avoid knocks or shaking during lifting or positioning.
If the machine has to be shipped, it is very important to secure it firmly to the means of transport, since
its centre of gravity is very high and accidents may occur.
Cutting range
3/16” - 2”
3/16” - 2”
Motor power (KW)
3
3
Dimensions (LxDxH in mm)
840x550x1150
840x550x1150
Controls
Electric
Electric
Weight (kg)
135
135
Noise level
The machine can easily be transported without any disassembly operation.
Nevertheless it is important to proceed as follows:
92.8 dB
92.8 dB
Voltage (Volts)
220-380V/50Hz
255-440V/60Hz
220V-50Hz
PRELIMINARY CHECKS
Place the machine on a stable surface which will ensure optimum support.
Make sure that the power supply line is fitted with a differential safety breaker and overload cut-out.
Make sure that the moving parts are clean and lightly greased (Type of grease racommended kluber
staburags NBV30).
LICHTING
The equipment does not have its own lighting and so it must be used in suitably illuminated areas. If perfect
visibility is not possible in the working area, use of the equipment must not be authorised.
Verify daily the wear and tear and the readability of the warning signs.
The motor doesn’t work when the switch is connected.
1. Check whether the wall switch corresponds to the machine’s switch poles.
2. Check whether the fuse of the wall switch is burnt.
www.samway.com [email protected]
