37
MP3 Encoding
36
Connect the Audio Output port on the external audio source (or the Line
Out port) to the ENC port on the device with the Line cable.
1
Slide the switch to the ENC position begin MP3 encoding.
2
Slide the switch to the REC position while recording to stop
the encoding, and a new encoding file will be created.
●
Recording will take place in the order of L001, L002, L003…. When the recording
is finished, the files will be saved as MP3 files.
3
N
N
o
o
t
t
e
e
:
:
●
Bit Rates can be set within the range of 32Kbps~128Kbps.
●
To pause during Encoding, press the
button.
Press the button once again to recommence recording.
●
Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
N
N
o
o
t
t
i
i
c
c
e
e
:
:
●
Do not disconnect the Line cable during Encoding.
●
If the battery is not charged enough, encoding will not be done.
●
Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
REC/ENC
REC/ENC
55-eng-new 7/25/03 3:40 PM Page 36
