English
Operations
English
44
•
When the AddWash door closes, the door seals up and no water can leak. However, you may encounter
what appears to be water leak around the door - some residual water remaining around the AddWash
door may form water drops. This is normal.
•
Neither the main door nor the AddWash door can be opened when the water temperature is over 50 °C.
If the water level inside the drum is over a certain point, the main door cannot be opened.
•
If an information code of ‘
AddWash door is open
’ appears on the display, see the
Information codes
section for further actions.
•
Keep the AddWash door and its surroundings clean at all times. Debris or detergent on or around the
seals of the AddWash door may cause a leak.
Adding laundry for non-AddWash models (applicable models only)
1.
Tap and hold to stop the wash cycle.
2.
Open the door and add the laundry into the drum.
3.
Close the door, and then tap and hold again to resume the wash cycle.
Smart control (applicable models only)
You can connect to the SmartThings app and control your washing machine remotely.
Connecting your washing machine
1.
Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2.
Tap to turn on the washing machine.
3.
Tap and hold .
a.
The washing machine enters AP mode and connects to your smartphone or tablet.
b.
Tap to authenticate your washing machine.
c.
Once the authentication process is complete, your washing machine is successfully connected to the
app.
-
You can use various features available in the SmartThings app.
NOTE
•
If your washing machine fails to connect with the SmartThings app, try again.
•
Check your router if you experience any Internet connection problem after connecting your washing
machine with the SmartThings app.
•
If the Wi-Fi is off, tap and hold for 3 seconds to enter the System functions menu, and select Wi-Fi to
turn it on.
•
Turning the washing machine's Wi-Fi on allows you connect to the washing machine via SmartThings
app on your smartphone or tablet, regardless of the power status of the washing machine. However, the
washing machine appears offline on the SmartThings app if the washing machine's Wi-Fi is off.
•
Close the door before starting the Smart Control function.
•
If you use your washing machine for a while without connecting it to the SmartThings app, a pop-up
message about Smart Control will show for 3 seconds.
•
If the washing machine's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you
turn of the power.
U-PJT_WASHER-MD_SimpleUX_DC68-04220A-01_AU_EN(����+�7.5��).indd 44
2020/9/29 13:02:42
