Before you start
English
25
Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the
drum is empty before running Calibration.
1.
Power off, and then power on the washing machine.
2.
Hold down
Temp.
and
Delay End
simultaneously for 3 seconds to enter Calibration
mode. The “
Cb
” message appears.
3.
Press
Start/Pause
to run the Calibration cycle.
4.
The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5.
When the cycle is complete, “
0
” appears on the display and the washing machine will
turn off automatically.
6.
The washing machine is now ready for use.
WW5500K_EN_151229.indd 25
2015-12-29 6:00:41
