English
English
23
D
6.
While pulling down
part (D)
on the water hose,
connect the water hose to the adaptor. Then,
release
part (D)
. The hose fits into the adaptor with
a clicking sound.
7.
To complete connecting the water hose, see 2 and
3 on the “
Connecting to a threaded water tap
”
section.
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is connected
properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring before
inserting the tap into the adaptor.
For models with an additional hot water inlet:
1.
Connect the red end of the hot water hose to the
hot water inlet on the back of the machine.
2.
Connect the other end of the hot water hose to the
hot water tap.
Untitled-6 23
2021-05-11 6:11:30