English
23
Installation
C
3.
Hold the adaptor and turn
part (C)
in the
arrow direction to loosen it by 5 mm (*).
C
4.
Insert the adaptor onto the water tap, and
then tighten the screws while lifting the
adaptor.
5.
Turn
part (C)
in the arrow direction to tighten
it.
D
6.
While pulling down
part (D)
on the water
hose, connect the water hose to the adaptor.
Then, release
part (D)
. The hose
fi
ts into the
adaptor with a clicking sound.
7.
To complete connecting the water hose, see
2 and 3 on the “
Connecting to a threaded
water tap
” section.
NOTE
•
After connecting the water hose to the adaptor, check if it is connected properly by pulling the
water hose downwards.
•
Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring
before inserting the tap into the adaptor.
WW3000TM_7-8KG_Jordan_8C104-000584_EN.indd 23
WW3000TM_7-8KG_Jordan_8C104-000584_EN.indd 23
2021-01-15 4:04:58
2021-01-15 4:04:58
