
English 21
Ins
tallation
C
3.
Holde the adaptor and turn part (C) in
the arrow direction to loosen it by 5 mm
(*).
C
4.
Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5.
Turn
part (C)
in the arrow direction to
tighten it.
E
6.
While holding down
part (E)
, connect the
water hose to the adaptor. Then, release
part (E)
. The hose fits into the adaptor
with a clicking sound.
7.
To complete connecting the water hose,
see 2 and 3 on the “
Connecting to a
threaded water tap
” section.
NOTE
•
After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
•
Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
WW75J3230KW_DC68-04083D-EN.indd 21
2019/8/19 15:36:37