Samsung WW10N6 Series, Руководство пользователя

Страница: 32 / 68

32 English
Oper
ations
Operations
Control panel
01
02
03
07
04 05 06
12
11
09 10 08
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
For buttons and icons, refer to the corresponding page..
03 Temp.
Press to change the water temperature for the current cycle.
Press and hold for 3 seconds to turn on/off the Drum Light.
The drum light turns off automatically after 2 minutes.
04 Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
05 Spin
Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
• Rinse Hold(No indicator): The final rinse process is suspended
so that the laundry remains in the water. To unload the laundry,
run a drain or spin process.
- To use the Rinse Hold option, press Spin repeatedly until all
rpm numeric indicators turn off. Not available for the DRAIN/
SPIN cycle.
• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds.
When the cycle time and spinning speed appear, press Spin
repeatedly until a desired spinning speed is selected. Then,
press and hold
Start/Pause (Hold to Start) to start the cycle. The
spinning time depends on the selected cycle.
06 Options
Press to select an option from Intensive and Pre Wash. Press again to
deselect.
WW10N64FRPW_DC68-03963H_EN.indd 32 2018/7/27 15:58:25