3
Remove the screws from the main body of the TV, assemble the 4 enclosed
plastic hangers and screws
ⓒ
as shown by the figure and firmly fasten them to
the back of the main body of the TV.
Hang the TV onto the wall mount and make sure to check if the TV has been installed properly onto the wall mount by
observing the assembled TV as you move the wall mount from left to right.
Take care not to hurt your fingers when you install the TV or adjust the wall mount.
Make sure to fix the wall mount onto the wall firmly. If the TV falls, it may result in injury or damage to the product.
4
Pull the wall mount brackets as far forward as possible and hang the TV onto the wall mount at the specified positions as shown
by the figure while 2 persons are holding the TV.
5
Tie the power cord and the other cables with the enclosed cable tie as shown by
the figure and make sure that the cables do not come loose when the wall mount
is adjusted.
After connecting the cables and pulling the adjustable mount as far forward
as possible, arrange the cables using the cable tie that has been passed
through the specified hole in the adjustable mount as shown by the figure.
The cable will then not interfere with the wall mount.
Check the operation 2 or 3 times and if there is no problem, fix the wall
molding.
Fix the TV onto the wall mount
firmly and turn the 2 safety catches
at the top of the wall mount brackets
to the lock position as shown by the
figure, so that the TV and the wall
mount do not become separated.
[Models before 2013]
[2013 F-series models]
Use M8X35 and M8X40 screws
ⓒ
Refer to the separate sheet
[For normal models]
[For slim models]
Wall Mount Guide-WMN4270S-03.indb 3
2012-12-18 �� 11:11:18
