Contents
Make sure to use the parts supplied with the wall mount when installing the wall mount.
Angle Adjuster
1
Screws
ⓐ
(M5X50): 15
Tilting and Swivel Wall Mount User Manual
WMN-7070
Parts
Anchors: 15
Screws
ⓒ
(M8X40):
4
Plastic Hanger: 4
Safety Precautions
Make sure to consult an engineer specified by your product provider about the product installation.
Make sure to consult an engineer specified by your
product provider when moving or replacing the product
after the installation.
Do not hang onto the wall mount and avoid severe
impacts to the wall mount after the installation.
The Assembled Wall Mount
Wire Fixing Part: 1
1. Do not let children play behind the wall mount. They may hurt themselves against the edge of the wall mount.
2. Take care when tilting or swiveling the wall mount because the back of the wall mount may hit the wall.
(By attaching sponges to the edges of the wall mount, you can prevent damage to the wall and the wall mount.)
3. Do not install the wall mount in hot and humid locations or onto walls that are unable to sustain the weight of the wall mount.
4. Do not insert your fingers into the stand connection groove at the bottom of the TV while installing the TV onto the wall mount,
as there is a danger of electric shock.
5. Make sure to cover the connection groove of the TV stand with the supplied cover before finishing the wall mount installation.
※
This product can only be installed under the following conditions.
1) If the wall is made of concrete.
2) If the wall is made of wood, the wall should be at least 30 mm thick and all 12 screws should be used.
(The density of the wooden wall should be at least 0.35g/
㎤
. E.g. MDF)
3) The wall should sustain a weight of at least 500kg.
Bracket
Left: 1
Right: 1
Screws
ⓑ
(M8X15): 4
Assembly Tool
