protection of cable from Water
If this product is mounted outdoor, water leakage may occur at gap between cables. As shown below, butyl rubber (available on the
market) shall be used to protect from water.
1.
Connect power supply and BNC power source.
2.
Cover black sheath of the cable (Zone A), and ensure half of butyl rubber can cover the cable joint.
J
`
Poor water protection at the cable sheath may cause water leakage. Make sure to wrap tightly.
`
The water-proof butyl rubber is made of rubber that expands to twice the original length.
`
If you do not use cable joint, it must be covered with water-proof tape.
connecting the nVr
Use a 12V 0.5A power adpator to power each wireless camera. There is no need to connect cameras to NVR as it is wireless AIO.
HDMI
VGA
12V
CAUTION
RISK OF
ELEC
TRI S
HOCK
DO NO
T OPE
N
CAU
TION
: TO RE
DUCE TH
E RISK
OF ELEC
TRICAL S
HOCK
DO NO
T OPEN
COVER
S. NO USE
R SER
VICEABLE
PAR
TS INS
IDE. REFER
SER
VICING TO
QUALIFI
ED
SER
VICE
PERSO
NNEL.
WAR
NING : TO PRE
VENT FIR
E OR
SHOC
K HAZA
RD. DO
NOT
EXP
OSE
UNITS
NOT S
PECIFIC
ALLY D
ESIGN
ED
F
OR OUTDO
OR U
SE TO RA
IN OR
MOISTU
RE.
WAN
English
_
5
