Samsung WISENET SCO-5081R, Руководство пользователя

Страница: 26 / 38

26_ camera operation
camera operation
M
`
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night mode to auto.
`
When a bright light source is in the screen or there are frequent brightness changes, if you use the
auto night/day mode, and set the switching time to short (3, 5 sec), a hunting can be caused. In this
situation, it is recommended to use the default setting (30 sec).
-
EXTERN : Ground to the grounding terminal to allow automatic switching between
COLOR and B/W (Black/White).
-
COLOR : The picture is always displayed in color.
-
B/W : The picture is always displayed in black and white.
y BURST MODE : Activate or deactivate the burst mode to maintain or
remove the color signal.
y
IR MODE : When IR LED is turned on in B/W, the objects can be clearly
identified due to the function that decreases screen saturation of
objects within a short distance.
y
DEfog : You can use the defog
mode to allow the camera
to automatically detect the
fog density of the screen
and display a clear image
despite smog, fog or general poor visibility.
➊
MM If the SPECIAL menu screen is displayed, use the Function Setup switch so that
the arrow indicates ‘DEFOG’.
2
M Select a desired mode using the Function Setup switch.
-
AUTO : Adjust the level automatically.
-
MANUAL : Depending on the defog level set by the user, adjust the clarity of
image. (LOW, MIDDLE, HIGH)
-
OFF: Released state
M
`
If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be
also reduced. If you want to maintain the same level of defogging, set it to Manual.
`
If there is little fog and the manual fog level is high, the screen contrast can get high.
DEFOG MANUAL SETUP
▶
1.
LEVEL MIDDLE
2.
RETURN