Connecting to Vista PC for the first time
Steps 1-1 ~ 1-3 are only for WIRELESS networking.
1-1
Press
/
to select Wireless
Network and press the
oK
button.
Press
/
to select “
next
”, then
press the
oK
button.
1-2
Press
/
to select “
next
,” then
press the
oK
button.
1-3
Press the
/
to select "
finish
,”
then press the
oK
button.
If the network setup failure occurs,
the setup screen moves to the
setup procedure, “To set IP address
manually,” shown in the page 23.
When connecting by wireless network, make sure that Ethernet/LAN cable is not connected.
■
When using wireless network, the video quality may be poor depending on the network condition.
network setup
acquiring iP address
Please wait...
this process can take up to minutes.
next
Cancel
back
finish
back
network setup
successfully Connected
your device is now connected to your home network.
select finish to exit.
network setup
Choose your Wireless network
next
Cancel
back
wirelessaP : unsecure
b/g/n
aiportthru : unsecure
b
comp : unsecure
b/g
not listed
Grandprix_new.indd 13
2008-07-08 오후 1:32:33
