Samsung Wi-Fi Kit 2.0 MIM-H04AN, Руководство пользователя и инструкция по установке

Страница: 14 / 28

14
Installing the Wi-Fi Kit
Tenant address Group channel address for the indoor units controlled by a Wi-Fi Kit
A Controls the indoor units with the group channel address “A"
B Controls the indoor units with the group channel address “B"
C Controls the indoor units with the group channel address “C"
D Controls the indoor units with the group channel address “D"
E Controls the indoor units with the group channel address “E"
F Controls the indoor units with the group channel address “F"
- e.g. When you set the tenant address of a Wi-Fi Kit to 2 through the S-NET pro 2,
the Wi-Fi Kit can control and monitor the indoor units with the RMC1 set as 2.
4) Select the [Apply] button to save the specified tenant address for the Wi-Fi Kit.
• To set the group channel address for indoor units, see “Setting the indoor unit address" in
Installation Manual of the indoor unit.
[SEG9: 1 (for RMC address mode), SEG11: RMC1 address setting]
• To set the tenant address upon request, contact the Samsung service centre.
• To control all indoor units with different tenant addresses, make sure that all the Wi-Fi Kits are
registered to the smartphone.
• When using the multi-tenants feature for Wi-Fi Kits, the upper-level controllers (touch centralized
controller, DMS) other than the OnOff controller can be installed at the same time.
Checking the Wi-Fi Kit
Power LED
AP button
Wi-Fi connection LED
Reset button
Wi-Fi setting LED
<Front panel of the Wi-Fi Kit>
Items on the LED display
Item LED indication Power supply Wi-Fi connection Wi-Fi setting
1 Initialized On On On
2 General On On Off
3 AP connected, Internet connection incomplete On Blinking Off
NOTE
DB68-08992A-01_IBIM_OCF Wi-Fi Kit_SA_EN_.indd 14 2020-08-07 오전 10:32:46