English - 31
02
USING
Doing laundry
Doing laundry using the Cycle Selector
Your new washing machine makes washing laundry easy, using Samsung’s automatic control system “Fuzzy
Control”. When you select a wash cycle, the machine will set the correct temperature, washing time, and washing
speed.
1.
Turn on the water supply to the washing machine.
2.
Open the door.
3.
Add your laundry loosely into the drum without overfilling it.
4.
Close the door.
5.
Press the
Power
button to turn the power on.
6.
Add detergent, and if necessary, softener or prewash detergent into the appropriate compartments in the
detergent drawer.
The Prewash function is only available when selecting the Cotton, Synthetics, Denim, Stain Away,
Dark Garment, Daily Wash, Super Eco Wash and Baby Care cycles. It is only necessary if your clothing is
heavily soiled.
7.
Use the Cycle Selector to select the appropriate cycle according to the type of material: Cotton, Synthetics,
Denim, Stain Away, Dark Garment, Daily Wash, Super Eco Wash, Outdoor Care, Baby Care, Wool and Hand
Wash. The relevant indicators will light up on the control panel.
8.
At this time, you can control the wash temperature, the number of rinse cycles, the spin speed, and the delay
time by pressing the appropriate buttons.
9.
Press the
Start/Pause
button to start the wash. The progress indicator will light up and the remaining time
for the cycle will appear on the display.
Both the total cycle time and the number of rinse cycles in the Cotton cycle may vary depending on
the amount of laundry.
10.
After the total cycle has finished, the power will turn off automatically. Open the door and remove the
laundry.
Pausing the wash
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1.
Press the
Start/Pause
button to unlock the door.
If the water level or the water temperature inside the drum is too high the door is not opened with
the blinking “Door Lock “ indicator. In this case, wait until the indicator stops blinking. (It will take
approximately 1 or 2 minutes until the indicator stops blinking.)
2.
Open the door and add/remove the laundry.
3.
After closing the door, press the
Start/Pause
button to restart the wash.
F700E_WF80F7E-03248A-02_EN.indd 31
2013-9-26 9:43:49
