19
Setting up y
our washing machine
Connecting the hot water supply hose (selected models)
1.
Connect the
red L-shaped arm fitting (A)
for the hot water
supply hose to the hot water supply intake at the back of the
machine. Then tighten it by hand.
2.
Connect the other end of the hot water supply hose to your sink’s
hot water tap in the same way as you connected the cold water
supply hose.
To use only cold water, use the Y-piece.
A
Connecting the aqua hose (selected models)
The aqua hose was invented to ensure perfect leakage protection.
The aqua stop is attached to the aqua hose and automatically cuts the
water flow if the hose is damaged.
It also displays a
warning indicator (A)
on the aqua stop.
Connect the aqua hose by assembling the aqua stop on the tap as
shown.
A
F400E_WF60F4E-03251H-01_EN.indd 19
2013-01-18 �� 6:09:37
