32_
English
SELF CLEAn+
Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1.
Press the
power
button.
2.
Press the
self clean+
button.
• Once the Self Clean+ button is pressed, the
only function that can be set is Delay End.
3.
Press the
start/pause
button.
• When you press the Start/Pause button, Self
Clean+ begins.
•
Using Self Clean+, you can clean the drum without using a cleansing agent.
•
Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
• If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer.
(When using a
powder-type cleansing agent, remove the liquid detergent compartment.)
the self clean+ auto indicator function
• If the “
self clean+
” button is lit after a wash, it indicates that
tub (drum) cleaning is required. In this case, remove the
laundry from the washing machine, turn the power on, and
clean the drum by running Self Clean+.
• If you do not run Self Clean+ the “
self clean+
” indicator
turns off after one hour. However, the “
self clean+
”
indicator will light again after five washes. We strongly
recommend you run Self Clean+ when the indicator lights.
However, not running Self Clean+ will not prevent the
washer from running.
• Although the Self Clean+ Auto Indicator appears once
a month or so, the frequency may differ depending on the number of times the washing
machine is used. In most cases, the Self Clean+ indicator lights after every 40 washes.
maintaining your washer
caution
(USER)WF56H9100-03404A-12_EN.indd 32
2017/6/3 11:28:04
