24_
washing a load of laundry
washing a load of laundry
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience.
By pushing the
My Cycle
button, you activate the settings used during the
My Cycle
mode.
The
“My Cycle”
light will indicate activation.
You can select all options as follows in
“My Cycle”
mode.
1.
Select cycle using the
Cycle Selector
dial.
2.
After cycle selection, set each option.
See page 39 for available option settings with each cycle.
3.
Then, you can start
“My Cycle”
by pushing the
Start/Pause
button in
“My Cycle”
mode.
The cycle and options you select will be displayed the next time you choose
“My Cycle”
.
You can change the
“My Cycle”
settings by repeating the same process above.
The last used setting will be displayed the next time you choose
“My Cycle”
.
Steam
The Steam Wash function injects steam directly into the laundry in the wash tub to increase the
wash temperature and enhance the soak effect, thus improving the wash performance.
1.
Load the washer.
2.
Press the
Power
button.
3.
Turn the
Cycle Selector
and select a steam cycle. (The
Deep Steam
cycle automatically
selects the Steam Wash function.)
4.
Press the
Steam
button.
5.
Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked
line.
6.
Press the
Start/Pause
button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the
laundry.
If steam wash is selected, steam is injected at the most effective time for the detected
amount of laundry in order to maximize the effect of the steam.
WF520AB-02838A_EN.indd 24
2010-03-24 ¿ÀÈÄ 4:30:30
